View In Action
Leather and Copper, in Motion
Filmed with warm-white illumination settings. Actual metal tones and light diffusion may shift depending on bulb warmth and surrounding decor.
Key Design Characteristics
- Tactile Leather Wrapping: Real hides are wrapped and sewn directly onto the frame, offering organic texture and precision stitching unmatched by fake coatings.
- Heritage Metal Accents: Hand-applied aged copper fittings secure the structure, providing a warm, traditional patina that complements the textiles beautifully.
- Soft Linen Diffusion: Tapered fabric covers soften each bulb's output, creating glare-free downward light ideal for table use.
- Scalable Options: Choose between circle rings or straight bars, available in head counts of 4 through 10, fitting varied room scales cleanly.
Technical Specifications
- Materials: Genuine Leather, Brass, Linen Shades
- Finishes: Brown Leather, Aged Copper
- Illumination Source: E12 Candelabra Base
- Maximum Wattage: 40W
- Mounting Method: Ceiling Suspended
- Protection Rating: IP20 (Interior use only; moisture resistant not guaranteed)
- Dimming: Dependent on the selected lightbulbs
- Design Category: Mid-Century, Farmhouse, Transitional, Classic Luxury
System Info
- Voltage Requirement: 110V–240V Universal
- Fitting Type: Permanent Ceiling Mount
- Cabling: Hardwired (Expert wiring advised)
- Operation: Works with standard wall control switches (fixture switch separate)
- Adjustment Capabilities: Hanging rods fully configurable to match ceiling height. For custom cuts, contact customer service for assistance.
- Approval Marks: UL, CE, SAA Certified
- Total Service Period: 2 Years
Bramley Leather & Copper Chandelier
Hardwired · bulbs sold separately · indoor use only · two people recommended for install
Position 30″–36″ above a dining table or island · maintain at least 7 ft vertical clearance in walking zones.
Variable Height Adjustment. The unit arrives with stackable rod connectors allowing you to define the drop. Round models come with 20, 30, and 50 cm sections; linear versions include two 55 cm bars. Measurements provided refer to the fixture body only; actual drop height includes rod additions.
Dimensional Choices
Fixture height measured to highest point of structure · shade positioning shown for scale · rods added for total extension.
Round Option Best for: Foyers, Entryways, Round Tables
- 4 Lights: Diameter 28.5″ | Height 19.7″ (Shade Depth 12.6″)
- 6 Lights: Diameter 34″ | Height 19.7″ (Shade Depth 12.6″)
- 8 Lights: Diameter 48″ | Height 19.7″ (Shade Depth 12.6″)
- 10 Lights: Diameter 60″ | Height 19.7″ (Shade Depth 12.6″)
Linear Option Best for: Long Diners, Counters, Kitchen Islands
- 6 Lights: Length 51″ x Width 25″ | Height 23″
- 8 Lights: Length 62″ x Width 20.5″ | Height 19.7″ (Shade Depth 12.6″)
- 10 Lights: Length 72″ x Width 20.5″ | Height 19.7″ (Shade Depth 12.6″)
Sizing Tip: Over a dining table, pick a fixture roughly ½ to ⅔ the width of the surface. For general rooms, sum the length plus width of the room in feet—that figure in inches indicates the ideal diameter.
Suggested Locations
Adjustable Hang Configuration
Flexible Drop Heights
Customize Your Spacing
This lighting solution includes a series of connecting rods designed to layer together, giving you full control over the hanging level based on your space. Round fixtures utilize 20, 30, and 50 cm segments, while linear variations offer two 55 cm bars. Mix these parts to lower the light effectively over surfaces or elevate it for circulation paths.
For seating and countertop applications, we suggest installing the unit 30″–36″ higher than the flat surface. Managing high ceilings or specific clearance goals? Communicate your needs in the order notes to ensure precise length setup.
Material Quality Comparison
Different shades produce different results. While some obscure the bulb, the Bramley's linen material gently scatters the light.
This distinction lies in the shade choice. Every tapered cover is crafted from authentic linen—a woven fiber that filters the bulb into a consistent, warm glow versus the stark, concentrated beam from plastic cones.
Visualize this over your counter: the linen absorbs the light and distributes it softly across the area, creating a composed, styled atmosphere that synthetic alternatives fail to replicate.
| Linen Shade | Plastic / PVC | Synthetic Low-Quality | |
|---|---|---|---|
| Composition | Natural woven linen | Molded plastic | Thin polyester |
| Effect | Warm, soft & even | Direct & glaring | Uneven, dim |
| Surface Feel | Woven grain texture | Flat, glossy |
Common Questions
Is the leather real and are the fittings solid metal?
Yes. The frame is encased in hand-stitched pure leather, combined with solid copper components and tapered linens. As natural products, leather grain and hue differences occur slightly between units.
Which bulbs function properly here?
It fits standard candelabra base E12 bulbs, which are not supplied. We suggest warm white LEDs (2700–3000K) to achieve a cozy effect through the fabric. Verify the maximum wattage limit prior to installation.
What configurations are selectable?
Choose from two shapes. The ring variant offers 4, 6, 8, or 10 lights measuring 28.5″ to 60″ wide; the bar variant selects 6, 8, or 10 lights spanning 51″ to 72″ long. The fixture body measures roughly 19.7″ tall, augmented by the drop rods. Opt for round designs for foyers and circular tables, choosing linear styles for rectangular surfaces.
Can I modify the suspension height?
Yes. It is packaged with stackable connector drops to define elevation levels. Round sizes provide 20, 30, and 50 cm rods; linear bars supply two 55 cm rods. Combine them to suit your ceiling. Aim for 30″–36″ of overhang when placing over furniture.
Does it perform with dimmer switches?
It lacks an internal dimmer function, but operates smoothly with dimmable E12 bulbs paired with a compatible wall controller. Ensure both components share dimmability ratings to prevent flickering.
Is professional installation mandatory?
Generally, yes. Being a hardwired unit, particularly heavier models, a certified electrician is suggested for mounting. Having an assistant helps during the lift. Always cut power at the circuit breakers beforehand.
How do I maintain the leather and shades?
Ensure power is off. Gently wipe down fabric shades and metal frames using a soft dry rag. Condition the leather sparingly with a dedicated cleaner. Stay away from water sprays or strong chemicals that might damage the skin or tarnish the metal.
Maintenance Summary
- Dust regularly with soft cloth
- Avoid liquid cleaners
- Condition leather occasionally
- Erase dust from metal parts